Machinery Training
Counter Balance Forklift
Counter Balance forklift trucks are the most common type of forklift truck, and the type most people instinctively think about when thinking of forklifts. On counterbalance trucks, the forks protrude from the front of the machine, with no outrigging legs or arms, meaning the truck can be driven up to the exact location of the load or racking. They are available as electric, gas or diesel powered. Many have side shifts and a mast tilt facility.
We provide Counter Balance Forklift Training in Belfast and throughout Northern Ireland.
Multi-Directional Forklift
The multi directional forklift truck is a 1 stop solution for the applications that require handling of long or palletised loads on smooth or rough terrain. As this trucks name suggests (multi directional) it has the capability of travelling forwards, backwards & side to side with its triple rotating wheels. Widely used in the timber and steel industries.
We provide Multi Directional Forklift Training in Belfast and throughout Northern Ireland.
Very Narrow Aisle Forklift
These trucks are used for stacking loads, medium and high level order picking or in some instances both functions. Their unique feature is their steering method. VNA trucks are normally only steered by the operator when transferring from one stacking aisle to another. Training is available on both man up and man down trucks and is tailored to cover all functions relevant to delegates’ equipment type and the working environment.
We provide Very Narrow Aisle Forklift Training in Belfast and throughout Northern Ireland
Telescopic Handler
These trucks provide a more versatile alternative to the traditional masted counter balance truck, offering both forward and vertical reach and greater lift heights. Training is available on all truck types including industrial, rough terrain and 360 degree telehandlers as well as a wide range of attachments.
Cherry Picker / Scissor Lift
Cherry Picker lifts have a large range of movement with sideways outreach, allowing the work platform to gain access around and over obstacles. Sometimes referred to as a telescopic boom. A scissor lift may often be referred to as a vertical lift. They are extremely useful if you are looking to work at different heights which require you to move to different levels.
Overhead Crane / Slinging
Overhead cranes are used in many different types of industrial applications and, although the principle of operation remains the same ( i.e the load is lifted from directly above), the methods may vary.
- Pendant control-the crane is manoeuvred by a pendant control attached to the crane that is held at ground level by the operator.
- Remote control-this is similar to the pendant control system but the remote control is not attached to the crane thus allowing the operator more freedom to work from the optimum location.
- Cab control-the operator is located in a cab that is usually attached to the crane to give them good vision of the operation from above.
Pallet Truck
Pallet trucks come in many forms and can be pedestrian or rider operated or in some cases both, with a stand on platform. We train on all makes and models from manual hand pallet trucks and low level order pickers through to ride on powered pallet trucks.
Reach Truck
This truck gives access to narrower aisles than the counter balance forklift truck by about 25%. When used to their full potential, reach trucks can bring down the costs per pallet stored by enabling reduced aisle widths. They can be used for more specialist applications e.g multi directional, outdoor use.
Pivot Steer Fork Lift
Pivot Steer Forklift Truck is also referred to as Bendi or Flexi Truck. These trucks are commonly used inside warehouses with narrow aisles and racking systems. Very similar to a Standard Forklift Truck with the exception that there is an additional function to swing the mast to a 90 degree angle.
Manual Handling
The manual handling training course is intended to provide students with an understanding of how to safely handle loads. It covers practical aspects of lifting, lowering, carrying, pushing and pulling loads. It also provides information on the human spinal system, risk assessment, the legal responsibility of employers to their employees and techniques for the prevention of accidents.
Abrasive Wheels
Training is in line with the Provision and Use of Work Equipment Regulations (PUWER 1998) for safety in the use of abrasive wheels and provide delegates with the knowledge and ability to cut or grind. This training course is designed to meet the requirements for safely using and handling the equipment.
Other Industrial Machinery
We also provide training on other Industrial Machinery and Plant Equipment on request. Please contact us to discuss your requirements.
